Uses of Interface
com.rscja.deviceapi.interfaces.IHandheldRFID

Packages that use IHandheldRFID

Package	Description
com.rscja.custom
com.rscja.deviceapi
com.rscja.deviceapi.interfaces
com.rscja.team.mtk.custom
com.rscja.team.mtk.deviceapi
com.rscja.team.qcom.ble
com.rscja.team.qcom.custom
com.rscja.team.qcom.deviceapi

Uses of IHandheldRFID in com.rscja.custom

Classes in com.rscja.custom that implement IHandheldRFID

Modifier and Type	Class and Description
class	M775Authenticate 英频杰特殊标签定制 Special label customization 第一步:通过RFIDWithUHFUART.init(Context context) 连接读写器。 Step 1: Connect to the usb of the reader viaRFIDWithUHFUART.init(Context context) 第二步： 如果是设置参数，连接成功之后，调用对应的函数设置参数、读写操作。 盘点标签之前先要设置回调函数M775Authenticate.setInventoryCallback(IUHFInventoryCallback),然后调用盘点函数RFIDWithUHFUART.startInventoryTag()开始执行盘点。 注意: 在盘点标签的时候rfid模块只能响应RFIDWithUHFUART.stopInventory()函数。 For parameter setting, after the connection is successful, call the corresponding function to set parameters and read/write operations.
class	RFIDWithUHFJieCe
class	UHFCSYX MQTT是长沙盈芯，定制接口
class	UHFTamperAPI 阿联酋Acube 定制接口
class	UHFTemperatureSensors
class	UHFTemperatureTag
class	UHFTemperatureTag.RFIDWithUHFBLEN51
class	UHFTemperatureTag.RFIDWithUHFBLEN52
class	UHFTemperatureTagsAPI
class	UHFUartFoxconn
class	UHFUartTemperatureTag
class	UHFXSAPI

Uses of IHandheldRFID in com.rscja.deviceapi

Classes in com.rscja.deviceapi that implement IHandheldRFID

Modifier and Type	Class and Description
class	RFIDWithUHFA4 UHF模块 A4操作类 UHF module operation type 第一步:通过RFIDWithUHFA4.init(Context context) 连接读写器。 Step 1: Connect to the usb of the reader viaRFIDWithUHFA4.init(Context context) 第二步： 如果是设置参数，连接成功之后，调用对应的函数设置参数、读写操作。 如果是盘点标签先调用RFIDWithUHFA4.setInventoryCallback(IUHFInventoryCallback inventoryCallback)设置标签回调接口，有标签数据就会回调这个接口。 然后在调用RFIDWithUHFA4.startInventoryTag()函数开始执行盘点。 注意: 在盘点标签的时候rfid模块只能响应RFIDWithUHFA4.stopInventory()函数。 Step 2: If it is to set parameters, after the connection is successful, call the corresponding function to set parameters, read and write operations.
class	RFIDWithUHFA8 UHF模块 A8操作类 UHF module operation type 第一步:通过RFIDWithUHFA8.init(Context context) 连接读写器。 Step 1: Connect to the usb of the reader viaRFIDWithUHFA8.init(Context context) 第二步： 如果是设置参数，连接成功之后，调用对应的函数设置参数、读写操作。 如果是盘点标签先调用RFIDWithUHFA8.setInventoryCallback(IUHFInventoryCallback inventoryCallback)设置标签回调接口，有标签数据就会回调这个接口。 然后在调用RFIDWithUHFA8.startInventoryTag()函数开始执行盘点。 注意: 在盘点标签的时候rfid模块只能响应RFIDWithUHFA8.stopInventory()函数。 Step 2: If it is to set parameters, after the connection is successful, call the corresponding function to set parameters, read and write operations.
class	RFIDWithUHFAxBase
class	RFIDWithUHFBLE UHF模块低功耗蓝牙操作类 UHF module operation type
class	RFIDWithUHFRLM
class	RFIDWithUHFUART UHF模块手持机，串口通信操作类 UHF module handheld, serial communication operation interface 第一步:通过RFIDWithUHFUART.init(Context context) 连接读写器。 Step 1: Connect to the usb of the reader viaRFIDWithUHFUART.init(Context context) 第二步： 如果是设置参数，连接成功之后，调用对应的函数设置参数、读写操作。 如果是盘点标签先调用RFIDWithUHFUART.setInventoryCallback(IUHFInventoryCallback inventoryCallback)设置标签回调接口，有标签数据就会回调这个接口。 然后在调用RFIDWithUHFUART.startInventoryTag()函数开始执行盘点。 注意: 在盘点标签的时候rfid模块只能响应RFIDWithUHFUART.stopInventory()函数。 Step 2: If it is to set parameters, after the connection is successful, call the corresponding function to set parameters, read and write operations.
class	RFIDWithUHFUSB UHF模块手持机，USB通信操作类 UHF module handheld, USB operation interface 第一步:通过RFIDWithUHFUSB.init(Context context) 连接读写器。 Step 1: Connect to the usb of the reader viaRFIDWithUHFUSB.init(Context context) 第二步： 如果是设置参数，连接成功之后，调用对应的函数设置参数、读写操作。 如果是盘点调用RFIDWithUHFUSB.startInventoryTag()函数开始执行盘点。 注意: 在盘点标签的时候rfid模块只能响应RFIDWithUHFUSB.stopInventory()函数。 Step 2: If it is to set parameters, after the connection is successful, call the corresponding function to set parameters, read and write operations.

Uses of IHandheldRFID in com.rscja.deviceapi.interfaces

Subinterfaces of IHandheldRFID in com.rscja.deviceapi.interfaces

Modifier and Type	Interface and Description
interface	IRFIDWithUHFUSB
interface	IUhfBle

Uses of IHandheldRFID in com.rscja.team.mtk.custom

Classes in com.rscja.team.mtk.custom that implement IHandheldRFID

Modifier and Type	Class and Description
class	M775Authenticate_mtk
class	UHFTemperatureTagsAPI_mtk
class	UHFUartFoxconn_mtk

Uses of IHandheldRFID in com.rscja.team.mtk.deviceapi

Classes in com.rscja.team.mtk.deviceapi that implement IHandheldRFID

Modifier and Type	Class and Description
class	RFIDWithUHFUART_mtk

Uses of IHandheldRFID in com.rscja.team.qcom.ble

Classes in com.rscja.team.qcom.ble that implement IHandheldRFID

Modifier and Type	Class and Description
class	EmptyUhfBle
class	RFIDWithUHFBLEN51_qcom
class	RFIDWithUHFBLEN52_qcom

Uses of IHandheldRFID in com.rscja.team.qcom.custom

Classes in com.rscja.team.qcom.custom that implement IHandheldRFID

Modifier and Type	Class and Description
class	M775Authenticate_qcom
class	RFIDWithUHFJieCe_qcom
class	RFIDWithUHFShuangYingDianZi_qcom
class	RFIDWithUHFUARTUAE_qcom
class	UHFCSYX_qcom
class	UHFTamperAPI_qcom
class	UHFTemperatureTagsAPI_qcom
class	UHFTemperatureTagsBLEAPI
class	UHFUartFoxconn_qcom

Uses of IHandheldRFID in com.rscja.team.qcom.deviceapi

Classes in com.rscja.team.qcom.deviceapi that implement IHandheldRFID

Modifier and Type	Class and Description
class	RFIDWithUHFA4_qcom UHF模块 A4操作类 UHF module operation type
class	RFIDWithUHFA8_qcom UHF模块 A8操作类 UHF module operation type
class	RFIDWithUHFAxBase_qcom
class	RFIDWithUHFBLE_qcom UHF模块低功耗蓝牙操作类 UHF module operation type
class	RFIDWithUHFRLM_qcom
class	RFIDWithUHFUART_qcom
class	RFIDWithUHFUSB_qcom